How To Install Sata Hard Drive Windows 7

Windows 7 was hands downwards the most popular operating organization. Since Windows 10 is relatively new and has had its share of bugs and incompatibility, Windows 7 is withal being used past millions of people as an alternative. This means that people are still actively buying Windows 7 licenses and installing the operating system on their PC. Yet, at that place is a common trouble where the Windows seven setup does not recognize the hard drive that you want to install into. All yous encounter on the setup is a bare list box when it comes to choosing a drive to install into. There is also a vague message preceded past an exclamation in a xanthous triangle stating "No drivers found Click load driver to provide a mass storage driver for installation." This article will explore this problem, give the reasons why it occurs and finish off past giving y'all working solutions to the problem.

Why Windows 7 Setup cannot find your hard drive

In order to read the difficult drive, Windows must accept the motherboard storage controller drivers, unlike the BIOS setup. Windows setup normally loads all the hard disk drivers but if your motherboard was unveiled subsequently the release of Windows 7, then there is a likelihood that your drivers are non loaded hence the hard deejay cannot exist detected. Y'all might see the hard drive in the BIOS setup but the Windows setup will non be able to find it.

Another mutual reason why your hard drive cannot exist detected in the volume file format. Windows usually read NTFS file format, so if your hard disk is new or was previously used in Ubuntu, Mac or Linux, in that location is a possibility that its file format is unreadable past the Windows setup.

The motherboard and hard drives besides connect in different ways (dictated past the motherboard storage controller) which determines how data is exchanged to and from the drive and the interface that is used in BIOS. This includes EFI/UEFI, SATA/IDE, SATA/ATA, SATA/AHCI, and SATA/RAID. Using the wrong connection protocol tin can lead to a conflict hence your hard drive will not be detected past the BIOS and by Windows setup.

Beneath is how y'all can resolve this consequence. First with this method 3, iv & 5 if your BIOS is not able to notice your hard disk drive.

Method one: Format/Clean the Difficult drive using 'diskpart' in command prompt

If your hard bulldoze is detected by BIOS so using the "clean" command will format the difficult drive and fix the NTFS file format. You will lose any data that was saved in the difficult deejay so utilise this method if yous are absolutely sure you don't need the information in the hard drive.

1. Insert your Windows vii bootable disc or USB and restart your computer.
2. Press F12 to bring up the boot device options and cull the USB or DVD/RW (whichever has your Windows 7 setup)
3. A screen will come up asking yous to press whatever key to kick from DVD/RW or USB. Press any key to boot up Windows seven setup.
4. When the welcome screen comes up on Windows Setup, press Shift + F10, which volition brandish a command prompt (similar to choosing a language > Repair > Command Prompt)
5. Type "diskpart" (no quotes) and press enter.
6. Type "list disk" and printing enter.
7. Hopefully, you tin can encounter your drive in the list. Yous should see a number identifying it. Now blazon "select disk X" (where X is the number identifying your bulldoze) and press enter.
8. Type "clean" and press enter. This volition write a blank MBR, you lot will lose any information on the difficult bulldoze if you did take anything on information technology.
9. No retry installing Windows 7

Alternatively, remove your HDD, slave information technology to a machine that already has Windows and format the bulldoze using an NTFS file system. When finished, fix the HDD back on your machine and showtime your win7 installation.

Method two: Load the hard drive storage controller drivers from a USB into the Windows setup

If your SATA/storage controller is newer than your Windows vii version, then this method will load the missing storage controller drivers needed to observe your difficult deejay.

1. Working from another PC, download the hard drive host/storage controller drivers from your motherboard manufacturer, or from your PC manufacturer website (bold you take non changed the motherboard that came with your computer)
2. Extract the zip file into your USB bulldoze (if it a .exe file, add a .zero file at the end and extract to your USB)
3. Insert your Windows 7 bootable disc and the USB bulldoze into the PC with the installation problem and restart information technology.
4. Press F12 to bring up the boot device options and choose the USB or DVD/RW (whichever has your Windows vii setup)
5. A screen volition come up up request y'all to press any key to boot from DVD/RW or USB. Press any key to kick up Windows 7 setup.
6. When the welcome screen comes up on Windows Setup, choose a linguistic communication and click next
7. Have the license and terms and then click side by side
8. Select the Custom (advanced) installation
9. Windows will ask you where yous want to install the Bone but in that location won't exist anything in the list.
10. Click the 'load driver' link at the left bottom of the Window.
11. If you receive a message box request yous to plug in the device with your drivers, click on "OK" (or click Abolish and then Scan… to manually search for the driver. Yous have to pinpoint the commuter for this case. If necessary, close the warning nigh no suitable drivers, and uncheck the Hide drivers… checkbox)
12. Browse to the correct drive letter and location for the USB bulldoze and click OK
13. Once the driver is plant, you volition be prompted to select the controller from the list. Make sure information technology is selected and click Side by side:
14. The hard drive will now be shown and ready to begin the Windows vii installation: cull a drive and click "Adjacent" to go on with your installation.

Method 3: Alter the boot controller manner in BIOS

This method volition aid if your BIOS cannot find the hard bulldoze. By changing to the correct BIOS interface and data exchange machinery, the Windows 7 setup volition be able to detect your difficult drive. Yous have the pick of EFI/UEFI or SATA that has iv boot modes (ATA, RAID, IDE, AHCI).

1. Switch off your PC and restart information technology
2. Rapidly press F2 or F10 to boot into BIOS
3. Go to the "Advanced" tab and curlicue down to "SATA Mode."
4. Press enter and choose a mode. Become to get out and go out after saving changes. Restart and bank check if your HDD is now detected by the BIOS. Do this until it is detected.

If you lot are using RAID on your computer, change it to AHCI or IDE. Otherwise, just change whatever controller is selected and cheque to see if the issue persists. Afterwards doing so, format the disk using the get-go method or you lot tin can as well use Acronis True Image to complete the formatting process.

UEFI motherboard might miss this option since they only have 1 blazon of storage controller protocol. Notation that this method and the controller mode options might exist different for different computers. You can get the controller mode under "Host controller" "IDE Configuration" "SATA configuration" or something similar.

Method 4: Reset BIOS

If you changed the storage controller configuration due to an update of any sort, you could try resetting your BIOS.

1. Switch off your PC and restart it
2. Rapidly press F2 or F10 to kicking into BIOS
3. Go to the "go out" tab and select "Restore Defaults."
4. Select "Yep" in the warning message and exit after saving changes

Method 5: Use a different SATA port

If you are using a desktop figurer, endeavor using a different SATA port and see if that helps at all. Sometimes they come up with two dissimilar controllers.

Note: Sometimes, copying the Kicking Folder from the Windows install Disk to the USB drive fixes this particular issue so yous can have a get at that.

Kevin is a dynamic and cocky-motivated information applied science professional, with a Thorough knowledge of all facets pertaining to network infrastructure blueprint, implementation and assistants. Superior record of delivering simultaneous big-scale mission disquisitional projects on time and under upkeep.

Source: https://appuals.com/fix-no-hard-drives-found-windows-7-installer/

Posted by: shanklehationen2001.blogspot.com

Share this post